skip to Main Content رابط موقع

انظر هذا الموقع It is important that track and stock conform to the Wheel Profile, Track Gauge, and Running Gauge standards. The buffing and drawgear standards should be treated as recommendations for anyone not working to accurately scaled full size dimensions, e.g. if your prototype had slightly shorter buffers or longer couplings, that would not make the model incompatible and would be acceptable. If you are unsure what the full size dimensions were, you can use the standards.

كيف يتم بيع وشراء الاسهم

http://highstxray.com.au/?pyzo=%D8%B3%D9%88%D9%82-%D8%A7%D9%84%D8%A7%D8%B3%D9%87%D9%85-%D8%AF%D8%A8%D9%8A&1a0=29 Below are links to the six standards so far agreed.

طرق سهلة سريعة لكسب المال
Running Gauge Full Size

Running Gauge Full Size

Running Gauge A4 Size

Running Gauge A4 Size

Track Gauge Full Size

Track Gauge Full Size

Track Gauge A4

Track Gauge A4

Wheel Profile Size Full Size

Wheel Profile Full Size

Wheel Profile Size

Wheel profile A4

Link Coupling Full Size

Link Coupling Full Size

Link Coupling A4

Link Coupling A4

Buffering Drawgear 1 Full Size

Buffering Drawgear 1 Full Size

Buffering Drawgear 1 A4

Buffering Drawgear 1 A4

Buffering Drawgear 2 Full Size

Buffering Drawgear 2 Full Size

Buffering Drawgear 2 A4

Buffering Drawgear 2 A4

Back To Top